Errata: Steel Plate Shear Walls Are Not Plate Girders

Jeffrey W. Berman; Michel Bruneau

doi:10.62913/engj.v42i1.846

Errata: Steel Plate Shear Walls Are Not Plate Girders

Authors

Jeffrey W. Berman
Michel Bruneau

DOI:

https://doi.org/10.62913/engj.v42i1.846

Abstract

Errata

Downloads

PDF

Published

03/31/2005

How to Cite

Berman, J. W., & Bruneau, M. (2005). Errata: Steel Plate Shear Walls Are Not Plate Girders. Engineering Journal, 42(1), 61–61. https://doi.org/10.62913/engj.v42i1.846

Download Citation

Issue

Vol. 42 No. 1 (2005): First Quarter 2005

Section

Errata

Most read articles by the same author(s)

Jeffrey W. Berman, Michel Bruneau, Capacity Design of Vertical Boundary Elements in Steel Plate Shear Walls , Engineering Journal: Vol. 45 No. 1 (2008): First Quarter 2008
Jeffrey W. Berman, Michel Bruneau, Steel Plate Shear Walls Are Not Plate Girders , Engineering Journal: Vol. 41 No. 3 (2004): Third Quarter 2004
Hadi Kenarangi, Michel Bruneau, Amit H. Varma, Mubashshir Ahmad, Simplified Equations for Shear Strength of Composite Concrete-Filled Steel Tubes , Engineering Journal: Vol. 58 No. 3 (2021): Third Quarter 2021
Daniel M. Dowden, Michel Bruneau, Kinematics of Self-Centering Steel Plate Shear Walls with NewZ-BREAKSS Post-Tensioned Rocking Connection , Engineering Journal: Vol. 53 No. 3 (2016): Third Quarter 2016
Reza Imani, Michel Bruneau, Effect of Link-Beam Stiffener and Brace Flange Alignment on Inelastic Cyclic Behavior of Eccentrically Braced Frames , Engineering Journal: Vol. 52 No. 2 (2015): Second Quarter 2015
Charles W. Roeder, Dawn E. Lehman, Qiyang Tan, Jeffrey W. Berman, Andrew D. Sen, Discussion: Investigation on the Performance of a Mathematical Model to Analyze Concentrically Braced Frame Beams wtih V-Type Bracing Configurations , Engineering Journal: Vol. 58 No. 1 (2021): First Quarter 2021
Michel Bruneau, Jeffrey W. Berman, Diego Lopez-Garcia, Darren Vian, A Review of Steel Plate Shear Wall Design Requirements and Research , Engineering Journal: Vol. 44 No. 1 (2007): First Quarter 2007
Erkan Polat, Michel Bruneau, Cyclic Inelastic In-Plane Flexural Behavior of Concrete-Filled Sandwich Steel Panel Walls with Different Cross-Section Properties , Engineering Journal: Vol. 55 No. 1 (2018): First Quarter 2018
Yushan Fu, Michel Bruneau, Complementary Evaluation of Diagonal Tension Field Inclination Angle in Steel Plate Shear Walls , Engineering Journal: Vol. 56 No. 1 (2019): First Quarter 2019
Daniel M. Dowden, Michel Bruneau, Technical Note: New Z-BREAKSS: Post-tensioned Rocking Connection Detail Free of Beam Growth , Engineering Journal: Vol. 48 No. 2: Second Quarter 2011

1 2 > >>

| American Institute of Steel Construction

Errata: Steel Plate Shear Walls Are Not Plate Girders

Authors

DOI:

Abstract

Downloads

Published

How to Cite

Issue

Section

Most read articles by the same author(s)

Online ISSN

Getting Published

Feedback