Discussion: Design of I-Beam to Box-Column Connections Stiffened Externally

Nestor R. Iwankiw

doi:10.62913/engj.v31i3.630

Discussion: Design of I-Beam to Box-Column Connections Stiffened Externally

Authors

Nestor R. Iwankiw

DOI:

https://doi.org/10.62913/engj.v31i3.630

Abstract

Discussion

Downloads

PDF

Published

09/30/1994

How to Cite

Iwankiw, N. R. (1994). Discussion: Design of I-Beam to Box-Column Connections Stiffened Externally. Engineering Journal, 31(3), 110–110. https://doi.org/10.62913/engj.v31i3.630

Download Citation

Issue

Vol. 31 No. 3 (1994): Third Quarter 1994

Section

Discussion

Most read articles by the same author(s)

Cynthia J. Zahn, Nestor R. Iwankiw, Correction: Flexural-Torsional Buckling and its Implications for Steel Compression Member Design , Engineering Journal: Vol. 27 No. 3 (1990): Third Quarter 1990
Nestor R. Iwankiw, Design for Eccentric and Inclined Loads on Bolt and Weld Groups , Engineering Journal: Vol. 24 No. 4 (1987): Fourth Quarter 1987
Cynthia J. Zahn, Nestor R. Iwankiw, Flexural-Torsional Buckling and its Implications for Steel Compression Member Design , Engineering Journal: Vol. 26 No. 4 (1989): Fourth Quarter 1989
Nestor R. Iwankiw, Ultimate Strength Considerations for Seismic Design of the Reduced Beam Section (Internal Plastic Hinge) , Engineering Journal: Vol. 34 No. 1 (1997): First Quarter 1997
Nestor R. Iwankiw, Note on Beam-Column Moment Amplification Factor , Engineering Journal: Vol. 21 No. 1 (1984): First Quarter 1984
Michael I. Gilmor, Nestor R. Iwankiw, Enrique Martinez-Romero, Preface to the North American Design Comparisons , Engineering Journal: Vol. 36 No. 2 (1999): Second Quarter 1999
Nestor R. Iwankiw, Book Review: Design of Steel Bins for Storage of Bulk Solids (Gaylord & Gaylord, Prentice-Hall, 1984) , Engineering Journal: Vol. 22 No. 2 (1985): Second Quarter 1985
Nestor R. Iwankiw, Errata: Rational Basis for Increased Fillet Weld Strength , Engineering Journal: Vol. 34 No. 3 (1997): Third Quarter 1997
Nestor R. Iwankiw, Errata: Rational Basis for Increased Fillet Weld Strength , Engineering Journal: Vol. 39 No. 4 (2002): Fourth Quarter 2002
Nestor R. Iwankiw, Rational Basis for Increased Fillet Weld Strength , Engineering Journal: Vol. 34 No. 2 (1997): Second Quarter 1997

1 2 > >>

| American Institute of Steel Construction

Discussion: Design of I-Beam to Box-Column Connections Stiffened Externally

Authors

DOI:

Abstract

Downloads

Published

How to Cite

Issue

Section

Most read articles by the same author(s)

Online ISSN

Getting Published

Feedback