Discussion: The Effective Length of Columns in Unbraced Frames

Peter F. Adams; Joseph A. Yura; Bruce G. Johnston; Alfred Zweig

doi:10.62913/engj.v9i1.180

Discussion: The Effective Length of Columns in Unbraced Frames

Authors

Peter F. Adams
Joseph A. Yura
Bruce G. Johnston
Alfred Zweig

DOI:

https://doi.org/10.62913/engj.v9i1.180

Abstract

Discussion

Downloads

PDF

Published

03/31/1972

How to Cite

Adams, P. F., Yura, J. A., Johnston, B. G., & Zweig, A. (1972). Discussion: The Effective Length of Columns in Unbraced Frames. Engineering Journal, 9(1), 40–48. https://doi.org/10.62913/engj.v9i1.180

Download Citation

Issue

Vol. 9 No. 1 (1972): First Quarter 1972

Section

Discussion

Most read articles by the same author(s)

Joseph A. Yura, Fundamentals of Beam Bracing , Engineering Journal: Vol. 38 No. 1 (2001): First Quarter 2001
Joseph A. Yura, The Effective Length of Columns in Unbraced Frames , Engineering Journal: Vol. 8 No. 2 (1971): Second Quarter 1971
Joseph A. Yura, Karl H. Frank, Testing Method to Determine Slip Coefficient for Coatings Used in Bolted Joints , Engineering Journal: Vol. 22 No. 3 (1985): Third Quarter 1985
Charles J. Carter, Raymond H.R. Tide, Joseph A. Yura, Closure: A Summary of Changes and Derivation of LRFD Bolt Design Provisions , Engineering Journal: Vol. 35 No. 1 (1998): First Quarter 1998
Charles J. Carter, Raymond H.R. Tide, Joseph A. Yura, A Summary of Changes and Derivation of LRFD Bolt Design Provisions , Engineering Journal: Vol. 34 No. 3 (1997): Third Quarter 1997
Joseph A. Yura, Jr. Driscoll, Plastic Design of Multi-Story Buildings—A Progress Report , Engineering Journal: Vol. 2 No. 3 (1965): Third Quarter 1965
Karl H Frank, Joseph A. Yura, Fouad H. Fouad, Bolted Shear Connections with Painted Surfaces , Engineering Journal: Vol. 21 No. 3 (1984): Third Quarter 1984
D. Polyzois, Joseph A. Yura, Effect of Burrs on Bolted Friction Connections , Engineering Journal: Vol. 22 No. 3 (1985): Third Quarter 1985
Bruce G. Johnston, The New Guide to Stability Design Criteria for Metal Structures , Engineering Journal: Vol. 13 No. 3 (1976): Third Quarter 1976
Alfred Zweig, Errata: Design of Bolts or Rivets Subject to Combined Shear and Tension , Engineering Journal: Vol. 4 No. 1 (1967): First Quarter 1967

1 2 > >>

| American Institute of Steel Construction

Discussion: The Effective Length of Columns in Unbraced Frames

Authors

DOI:

Abstract

Downloads

Published

How to Cite

Issue

Section

Most read articles by the same author(s)

Online ISSN

Getting Published

Feedback