Discussion: Design of Composite Beams with Formed Metal Deck

George Winter; John W. Fisher

doi:10.62913/engj.v8i1.159

Discussion: Design of Composite Beams with Formed Metal Deck

Authors

George Winter
John W. Fisher

DOI:

https://doi.org/10.62913/engj.v8i1.159

Abstract

Discussion

Downloads

PDF

Published

03/31/1971

How to Cite

Winter, G., & Fisher, J. W. (1971). Discussion: Design of Composite Beams with Formed Metal Deck. Engineering Journal, 8(1), 32–35. https://doi.org/10.62913/engj.v8i1.159

Download Citation

Issue

Vol. 8 No. 1 (1971): First Quarter 1971

Section

Discussion

Most read articles by the same author(s)

Jorgen G. Ollgaard, Roger G. Slutter, John W. Fisher, Shear Strength of Stud Connectors in Lightweight and Normal-Weight Concrete , Engineering Journal: Vol. 8 No. 2 (1971): Second Quarter 1971
Patrick J. McMackin, Roger G. Slutter, John W. Fisher, Headed Steel Anchor under Combined Loading , Engineering Journal: Vol. 10 No. 2 (1973): Second Quarter 1973
Jr. Grant, Roger G. Slutter, John W. Fisher, Composite Beams with Formed Steel Deck , Engineering Journal: Vol. 14 No. 1 (1977): First Quarter 1977
John W. Fisher, Design of Composite Beams with Formed Metal Deck , Engineering Journal: Vol. 7 No. 3 (1970): Third Quarter 1970
Joan S. Dahl, Le-Wu Lu, John W. Fisher, John Abruzzo, Comparative Effectiveness of Tightening Techniques for A490 1 1/4- in. Diameter Bolts , Engineering Journal: Vol. 33 No. 1 (1996): First Quarter 1996
John H.A. Struik, Abayomi O Oyeledun, John W. Fisher, Bolt Tension Control with a Direct Tension Indicator , Engineering Journal: Vol. 10 No. 1 (1973): First Quarter 1973
Joan S. Dahl, Le-Wu Lu, John W. Fisher, John Abruzzo, Closure: Comparative Effectiveness of Tightening Techniques for A490 1 1/4- in. Diameter Bolts , Engineering Journal: Vol. 34 No. 1 (1997): First Quarter 1997
John W. Fisher, Ben T. Yen, Fatigue Strength of Steel Members with Welded Details (T.R. Higgins Award) , Engineering Journal: Vol. 14 No. 4 (1977): Fourth Quarter 1977
John W. Fisher, Alan W. Pense, Experience with Use of Heavy W Shapes in Tension , Engineering Journal: Vol. 24 No. 2 (1987): Second Quarter 1987
John W. Fisher, A.L. Abolitz, Discussion: Plastic Design of Eccentrically Loaded Fasteners , Engineering Journal: Vol. 4 No. 2 (1967): Second Quarter 1967

| American Institute of Steel Construction

Discussion: Design of Composite Beams with Formed Metal Deck

Authors

DOI:

Abstract

Downloads

Published

How to Cite

Issue

Section

Most read articles by the same author(s)

Online ISSN

Getting Published

Feedback