Application of AISC Specification Requirements for Second-Order Analysis and Stability Design

Rafael Sabelli; Allen Adams; David Landis

doi:10.62913/engj.v60i4.1315

Application of AISC Specification Requirements for Second-Order Analysis and Stability Design

Authors

Rafael Sabelli
Allen Adams
David Landis

DOI:

https://doi.org/10.62913/engj.v60i4.1315

Abstract

Errata to an article that appeared in Vol. 60, No. 3, 2023.

Downloads

PDF

Published

12/31/2023

How to Cite

Sabelli, R., Adams, A., & Landis, D. (2023). Application of AISC Specification Requirements for Second-Order Analysis and Stability Design. Engineering Journal, 60(4). https://doi.org/10.62913/engj.v60i4.1315

Download Citation

Issue

Vol. 60 No. 4 (2023): Fourth Quarter 2023

Section

Errata

Most read articles by the same author(s)

Rafael Sabelli, Brandt Saxey, Closure: Design for Local Member Shear at Brace and Diagonal-Member Connections: Full-Height and Chevron Gussets , Engineering Journal: Vol. 60 No. 3 (2023): Third Quarter 2023
Rafael Sabelli, Allen Adams, David Landis, Application of AISC Specification Requirements for Second-Order Analysis and Stability Design , Engineering Journal: Vol. 60 No. 3 (2023): Third Quarter 2023
Judy Liu, Rafael Sabelli, Roger L. Brockenbrough, Timothy P. Fraser, Expected Yield Stress and Tensile Strength Ratios for Determination of Expected Member Capacity in the 2005 AISC Seismic Provisions , Engineering Journal: Vol. 44 No. 1 (2007): First Quarter 2007
Rafael Sabelli, Brandt Saxey, Design for Local Member Shear at Brace and Diagonal-Member Connections: Full-Height and Chevron Gussets , Engineering Journal: Vol. 58 No. 1 (2021): First Quarter 2021
Rafael Sabelli, Brandt Saxey, Chiao-Hsien Li, William A. Thornton, Design for Local Web Shear at Brace Connections: An Adaptation of the Uniform Force Method , Engineering Journal: Vol. 58 No. 4 (2021): Fourth Quarter 2021
Rafael Sabelli, Recommended Procedures for Buckling- Restrained Brace Frames , Engineering Journal: Vol. 41 No. 4 (2004): Fourth Quarter 2004
Rafael Sabelli, Eric Bolin, The Chevron Effect: Reserve Strength of Existing Chevron Frames , Engineering Journal: Vol. 59 No. 3 (2022): Third Quarter 2022
Rafael Sabelli, Lawrence Griffis, Louis F. Geschwindner, Determination of Second-Order Effects and Design for Stability Using the Drift Limit , Engineering Journal: Vol. 58 No. 3 (2021): Third Quarter 2021
Rafael Sabelli, Lawrence Griffis, Technical Note: Internal Second-Order Stiffness: A Refined Approach to the Rm Coefficient to Account for the Influence of P-? on P-? , Engineering Journal: Vol. 58 No. 2 (2021): Second Quarter 2021
Rafael Sabelli, The Indirect Analysis Method of Design for Stability: An Amplifier to Address Member Inelasticity, Member Imperfections, and Uncertainty in Member Stiffness , Engineering Journal: Vol. 57 No. 2 (2020): Second Quarter 2020

1 2 > >>

| American Institute of Steel Construction

Application of AISC Specification Requirements for Second-Order Analysis and Stability Design

Authors

DOI:

Abstract

Downloads

Published

How to Cite

Issue

Section

Most read articles by the same author(s)

Online ISSN

Getting Published

Feedback